Dymax Bluewave 200. BlueWave 200 V3.1 Dymax This unit emits energy in the UVA and visible portion of the spectrum (300-450 nm) for light curing of adhesives, coatings, and encapsulants Ideally suited for either manual or automated processes, the system contains an integral shutter which can be actuated.
DYMAX BlueWave 200 UV Curing Spot Lamp with Intensity from studylib.net
Page 17 Figure 10 shows the suggested relationship for both inputs and outputs between the BlueWave 200 and a PLC system Pin 8 will be open with respect to Pin 4, during startup prior to the Bulb lighting, or if the Bulb has failed
DYMAX BlueWave 200 UV Curing Spot Lamp with Intensity
The Dymax BlueWave® 200 UV Epoxy Curing Spot Lamp version 3.1 is a high-intensity, light-curing system designed for spot-curing epoxies, adhesives, coatings, and encapsulants The BlueWave 200 is a high-intensity, UV light-curing spot lamp system used for small-area curing of adhesives, coatings, and Page 17 Figure 10 shows the suggested relationship for both inputs and outputs between the BlueWave 200 and a PLC system
Dymax BlueWave 200 UV Curing Spot Lamp with Foot Switch Available. Dymax BlueWave ® 200 version 3.1 is a high-intensity, light-curing spot-lamp system Page 17 Figure 10 shows the suggested relationship for both inputs and outputs between the BlueWave 200 and a PLC system
DYMAX BLUEWAVE 200 QUICK START INSTRUCTIONS Pdf Download ManualsLib. The BlueWave 200 can operate normally in this condition but will shut itself off when the bulb has 2,000 hours of operation The BlueWave® 200 3.0 is a high-intensity, light-curing spot-lamp system